you need
  • - antenna amplifier and power supply for it;
  • - antenna splitter;
  • - antenna cable 75 ohms;
  • - ohmmeter;
  • - soldering and brazing materials;
  • - materials for sealing the hole in the wall.
  • - antenna connectors;
  • - antenna different designs.
Guide
1
If your home is equipped with a collective unit receiving radio waves, refrain from using an indoor antenna.Move the collective signal from the antenna to your television sets via the splitter CRAB (cable splitter subscriber household).
2
If you can not use collective antenna , check that the frequency band indoor antenna and television channels that she intended to take.Do not try to get a high-quality image decimeter channel via antenna reception meter waves and vice versa.
3
Pick experienced by the working length of the telescopic antenna.Remember that high-frequency ch
annel is not necessary to put forward all the tribes of the device receiving the radio waves.Degrade the television signal is capable of both insufficient and excessive length of the antenna.
4
to connect the antenna to the TV, use the special extension cable.Find the position in the room to achieve the best reception.If using an indoor antenna can not get a clear TV picture, use the outer.
5
Install it on the wall of the house, located opposite the TV center, Protect the device and the cable entry into the room from the rain.In a private house secure outer antenna on the roof, but only if your home is located in the area of ​​the lightning rod.
6
If you live in an area with poor reception of TV signal, get antenna with an amplifier.Secure the card with two screws provided and connect the coaxial cable.On the opposite side connect the dedicated plug, through which the supply voltage is applied to the amplifier, and blocked them from getting into the TV.Plug and power supply included in the delivery of the amplifier.