Guide
1
If you want to transfer in the interest , for example, the sector of the pie chart, the one hundred percent necessary to take a full turn, ie 360 ​​°.In this case, one percent is equal to one hundredth of 360, i.e. 3,6 °.So, to convert interest in known to you the value in degrees should be divided by 3.6.
2
However, for transfers interest , for example, the slope of the road, which is indicated on road signs as a percentage of 100% should be 45 °.The slope is defined as the ratio of the distance of the lift, which is passed from the start of measurement.In terms of geometry, in this case the percentage of slope will match the tangent to the apex of the triangle, from which have developed the measurement bias.To g
et the desired value, you can use an ordinary calculator, and calculate the tangent of the angle with the help of well-known online calculator, or use the table Bradis.In Windows also has a built-in calculator, which runs from the main menu on the button "Start".Expanding it should go to the section "All Programs", then in the "Standard" and click on the line "Calculator".
3
for transfer to interest degrees fortress drinks did not need to be considered - these values ​​are equal to each other and determine the proportion (percentage) of ethyl alcohol.Degrees - is obsolete designation that is not used in accordance with the requirements of GOST replaced percent.
4
Degree dedication of a new member, received a Masonic lodge converted into interest is not difficult - all of these degrees (degrees) three (Apprentice, Journeyman and Master).So, for example, apprentices can be considered 67% devoted, as each of the three degrees should allow one third (33.33%).