Tip 1: How to upholster wall paneling

Interior decoration home is not as important as the exterior.At the moment there are many ways to finish.There was widespread clapboard siding.This process is quite easy, so it can perform almost anyone.
Guide
1
Lining is trimmed board, which has a thickness of about 20 millimeters.This board can be used for covering walls, ceilings, as well as for exterior trim of the house.When buying lining should pay attention to the presence of fungal infections, the presence of wormholes, quality, quantity, and size of the pods.
2
for home exterior sheathing is recommended to use a wider bunk.There are several kinds of it.It is made of plastic and wood.If you decide to sheathe the room in which there is high humidity, it is best to use linings made of PVC.
3
Once the material is selected, you can begin to trim space.If you are using wooden battens, it is best to leave it for a day in the room, which will run plating.The tree must get used to the climate.Only then can you begin work.First, yo
u need to work on preparing the walls.If possible, it is recommended to attach the battens directly onto the wall with screws or large construction staples.If this option is not acceptable, then you need to start preparing the wall.
4
Before working well worth choose the direction for the paneling lining.Only then can you start making carrier grid.It will be attached to it a finishing material.Use a level and a plumb line while fixing the extreme bars.As a result, you should get a perfectly flat surface.To grill was flat, screws must be attached to the suspension bars at a distance of 70 centimeters.
5
Wall paneling to the grid is recommended to mount brackets or finishing nails.The battens connecting corners can be cut.After the installation of decorative material can be covered with lacquer or stain.

Tip 2: How to sheathe the walls lining

almost everyone in life at least once has to do repairs.Now DIY stores a huge amount of various finishing materials.About this choice could only dream of before.On what to stop?Finishing materials of wood eco-friendly, pleasing to the eye, easy to install and processed.So you've decided to upholster wall paneling.And if you are afraid of the magnitude of the work, and you absolutely have no idea where to start, then these simple and effective tips you will fall in handy.
Finishing materials of wood eco-friendly , pleasing to the eye , easy to install and processed
Guide
1
What you need to know about the cladding board or, as they say, lining.Make it out of different types of wood.On the one hand facing board has a groove and the other spike.When mounting board is connected to the spike groove than is achieved and the strength and density of the structure.Used linings for finishing, both internal and external surfaces of premises, as well as for lining baths and saunas.The apartment wall paneling creates a certain climate: high humidity absorb moisture, while cold gives.The walls are covered with high-quality veneered board, give comfort and a special charm throughout the room.
2
Like any process, interior wall paneling starts with the preparation, but in our case we will just prepare the wall.If you have wood and smooth walls, can be installed immediately, but in practice a successful combination is very rare.Otherwise it will have to tinker.
3
Please do crate.For this we need wooden slats about 60 × 30 mm.There is a simple rule: if you plan to have facing boards vertical, horizontal slats nailed and vice versa.The average distance between two neighboring strips should not be less than 60 cm. Do not install the crate on the eye, use a plumb, level and square building.
4
professional builders recommend starting from the corner.Set the first board using the level and nail her nails.If you are not very important to the appearance of the surface of the nails can be nailed in the middle of the boards.In the case where you want a beautiful surface mounting to hide.To do this, you need to drive nails into the edge of the stud.And when mounting the next board, they will be hidden.
5
Instead of nails, you can use special screws or staples.The main thing is not to split facing the board in the process of fixing, so you need to advance the nail "blunt" and before screwing the screw - pre-drill a hole The thin.
How to sheathe the walls lining
Helpful Hint
to insulate walls and improve sound insulation in the cell between the batten can put insulating material.Before facing the wall paneling, ensure the reliability of the wiring.It is advisable to make a drawing of all the parts of the wiring, as well as various key elements for you.
Note
This deco decorate the home, make it cozy, while you can do the job without any construction skills.
Helpful Hint
For fastening lining the walls or the ceiling, there are different ways, but they all involve the use of crates.Crate - a supporting structure made of wooden slats or metal profiles, which, after fixing it on the wall is sheathed clapboard.Thus between the wall and the lining remains a gap of a few centimeters, and it is a ventilation shaft.In addition, the gap will reduce the risk that the tree will begin lining box or mold.

0
0