you need
  • - pipe;
  • - welding machine;
  • - waterproofing materials;
  • - manual drill.
Guide
1
To start, determine the source of the problem.It can occur for various reasons: cracks in the foundation of the building, poor quality or improperly executed waterproofing, no drainage, sewer flows, etc.The exact reason why it is easier to find a way to solve problems.
2
So find that leak in the basement caused by a gust of passing through the pipeline to proceed immediately to replace the pipe.Shut off the water, remove the leaking portion of the pipe and replace it with a new one.
3
If the humidity in the basement is due to infiltration of groundwater, wit
hout proper waterproofing of the problem can not cope.There are two ways to create a structural waterproofing: vertical and horizontal.Perform horizontal waterproofing the basement in the event that the building strip foundations.This barrier, lying across the basement walls to protect the residential floors from moisture.In turn, the vertical waterproofing protection against penetration of the basement of groundwater and precipitation.
4
Equip basement drainage system.As a general rule, the installation of drainage wells is carried out in the construction phase, but there are exceptions to the rule.Well drilled with a hand drill five or six meter hole: by performing this operation, you will be able to accurately determine the depth at which lies mainland sand.Due to the presence of drainage wells, water will not accumulate in the basement , and will be free to leave.