Tip 1: How to apply fire-retardant paint

Wood is a combustible material.Wooden buildings most in need of application of flame retardants.Therefore, the greatest variety of fire-retardant paint developed specifically for wood.
Guide
1
Choose a suitable paint.Recently, a large widespread intumescent mineral paints for wood.Coatings of this type are not only flame retardant, but also antiseptic.
2
Clean wooden surface of grease and dirt.Remove the old paint by sanding.Clean the dust remaining after grinding work.Thoroughly dry the treated surface.
3
should know that in the fire retardant paint containing alkaline.Therefore, when working with it must comply with safety measures.Wear protective clothing, gloves and goggles.Take care of respiratory protective equipment.If ink gets into your eyes or on exposed skin, wash thoroughly with running water damaged areas.
4
Select application method

retardant paint can be applied to a wooden surface either manually or mechanically by.For manual application of paint brush and
apply the paint rollers.Carefully read the instructions.Note the amount of paint required for the first group of flame-retardant efficiency.
5
to paint by mechanical means can be used airless injection or application, as well as spray guns.Typically, they are used for the application of fire retardant paint on large surfaces.Please be aware that when working with spray it is necessary to make allowance for loss ratio.Usually, it is 1.15.Hold the spray should be strictly perpendicular to the wood surface.Apply the paint should be at a distance of 250-350 mm strips.Each successive strip should overlap the previous one by about 1/3.
6
Stir fire-retardant paint.Apply the first layer of the selected method.Wait until dry.Typically, when a temperature of + 18-22 degrees and this period is no more than four hours.
Apply the next layer.Time of complete drying of the coating after the application of layers of fire-retardant paint is 24-36 hours.
Make sure that the coating is uniform and continuous.

Tip 2: How to apply fire-retardant paint

retardant paint is applied to wood materials to achieve the required level of fire safety and make the surface of protective and decorative properties.Creating the necessary conditions for the paint work, and adherence to technology paint considerably prolong the life of materials.
How to apply fire-retardant paint
you need
  • - brush or using spray application;
  • - mask;
  • - Points;
  • - capacity;
  • - water;
  • - scraper.
Guide
1
based paint includes crystalline hydrate water which is under the influence of heat is released, preventing the heating of the protected surface above 100 ° C.Fire-retardant paint with the swells and forms a heat insulating layer is durable.
2
Prepare the surface for staining.Clean it from dust, dirt and oil stains.Old peeling paint is removed using a special liquid or scraper.Dry the surface.
3
room where the paint work will be carried out, should be well ventilated.To protect the skin, eyes and respiratory use special clothing, gloves, goggles and mask.The paint before use mix thoroughly using a drill with a paddle-mixer must be provided low speed.Weight must acquire a smooth consistency.
4
Apply paint roller, trowel, brush or spray in two or three layers.Deposition of each new layer must precede absolute drying the previous one.The intermediate drying at 18-22oS takes less than one hour.At higher humidity and lower temperatures (but not below 5 ° C) drying time may have to be increased to two days.
5
After applying the last layer of paint, leave for 24 hours to dry completely.Upon completion of the paint, wash and rinse all the tools and containers with water.At the time of technical breaks leave the spatula, brush, roller or spray gun in a container with water.
Note
If ink gets on your skin, wash it off with soap and water, and after drying lubricate code fat cream.In case of contact with eyes, rinse copiously with water, if necessary consult a doctor.
Helpful Hint
Note that work involving the application of fire retardant paint should be carried out at a relative humidity of 80% and a temperature of 5 ° C and above.
Helpful Hint
Rinse thoroughly with rollers, brushes and spray water.Do not pour paint residues into drains - it can lead to blockages.

0
0