you need
  • - mortar;
  • - lath, reinforcing mesh, nails;
  • - a plumb;
  • - Scratchy, spatula and other instruments.
Prepare the surface for plastering, clean it from dust and dirt.The stone, brick and concrete surfaces, rinse 3% hydrochloric acid solution, then wash with water.Get rid of oil stains (clay smear, then clean).If the wall is made of smooth bricks, make incisions with a hammer and chisel.
Wooden surface wreck shingles (wooden slats), or cover with reinforced mesh.The ends of the shingles nailed to the wall so that it is not warped or ruined plaster.To slats do not crack, moisten them with water.In those places where the wooden structures in contact with the stone or concrete, obsheyte line interface wire mesh 1.5-2
Check verticality walls and corners, the correct location of all window openings with a plumb and EDM.Place lighthouses in all corners of the facade and on each side of the window openings.In order to avoid differences in color plaster put on different days, follow nakryvku within the vertical or horizontal articulation at one time.
Apply preparatory layer;its thickness should not exceed 15 mm.If you need a thicker layer, apply it in several stages, each time waiting for the hardening of the previous.When the thickness of the gallop more than 4 cm base have to be braided wire on a nail or a net.Once the soil grab scratched his wavy horizontal lines depth of 4-5 mm;the distance between the lines can be 35-40 mm.To the solution scored the required strength, water it with water at least 2-4 times a day, especially in hot weather.
It is important to determine the optimal thickness of the layer of plaster, because too thin a layer will not hide irregularities and quickly gets wet in the rain, and too thick may crack.