To start enjoy a layout of the track.The width of the track to determine the 80 cm. If you pave a path is not a straight line, and with many bends (for example, between fruit trees), the width to sustain the entire length of the track, use the following method.To nail the board 2 long nails at a distance of 80 cm., Attach the stick, which will play the role of the handle (you can simply attach the board with nails to rake).Now where do intend to track, just a ride this board.Nails will leave marks on the ground, and your path will be smooth all over.
further without going beyond the mark, remove the soil to a depth of a bayonet.Make a small slope so that water does not accumulate on the track.The bottom of the trench tamp.
bottom of the trench drain, pour a thin layer of gravel and crushed stone (5-10 cm).It is also possible to use glass bottles.A great way to replace rubble or gravel in the drainage.Of course, this layer has to be smooth, without tilting, and check on the level.
now need to do paving "tiles" of the block of wood that are sure to have in every garden, which occasionally have to file down old trees.Of the block of wood and thick branches sawed "pancakes" height 10-15 cm (of course, all the segments must be of equal length).You can cut both on direct and on the bias.In the first case will turn round "pancakes" in the second - oval with an interesting pattern of annual rings.It is best to use a block of wood of different thickness, and then the track will turn out interesting and richer.
When the coating material is ready, you can begin to design coverage.All the "pancakes", you sawed, put the drainage tapping on the pad.All gaps between penechki fill any free-flowing mixture - the same gravel and sand.Seal can be watering.