Tip 1: How to make ships of matches

from conventional matches can do a variety of interesting handicrafts.Most often matches make houses, and we will try to make the layout of the ship, and without the use of glue.You will need to do about 6-7 boxes of matches , a coin, a support (you can use the box from the disc) and pliers.
Guide
1
Take a stand, put two matches parallel to each other at a distance of about 2.5 cm. Cover with a layer of 8 matches , and then this layer is perpendicular to another of the same.
2
now put the so-called well, consisting of 7 series.On top lay a layer of 8 matches so that the head facing away from the bottom row.Then lay out a series of 6 matches perpendicular to the previous and opposite bottom row, put a coin.
3
Now the corners of the well insert 4 matches so that the head looking up.In the same way, and stacked the remaining matches and take out a coin.
4
Take the resulting structure together and squeeze the cube from all sides to make matches exactly the corners (th
is should be done carefully so as not to break).Now turn the resulting upside down and insert vertical matches that serve as walls.Horizontal wall heads lay on a circle.
5
Now we need to pull out of the top five matches , but not until the end, but as a ladder, then put ship to the bottom.Next matches lay between pulling jack 2, 4 and 6, respectively matches (the last row fix between the third and fourth pulled out a match).At the same time pulled out the fourth set match 7 matches , which will push the whole dense row.Tipped fix matches between the top, bottom and pulling matches, then matches you need to pull your bit.
6
start making the stern.To do this, remove the lower central series of seven matches and insert reinforcing series of 7 matches , placing them on the side of the head so that their tails got out on the other side (the third row from the bottom, it should be free).On the same side, insert the 4 matches and 4 matches on the sides.
7
now lay dense rows matches and paste 9 matches top to squeeze these series.Put inclined matches and push the resulting structure.The boat is almost ready, on the upper deck, you can stick a few heads matches for decoration.

Tip 2: How to make a boat out of matchsticks

figurines and puzzle out matches probably at least once in his life did every - and many know how to do simple matchbox houses.This match is a universal tool for ornamental - they can do a lot of different figures and simple sculptures.For example, simple possible matches in a short period of time, without the use of glue and other devices to make an original boat , and in this article you will learn how to collect it.
How to make a boat out of matchsticks
Guide
1
Take a few matchboxes - to create boat and you have enough packs of six or seven matches .You will also need a common coin, wire cutters or cutter.Take a flat surface to work - a book or a box of CD and place it parallel to the two matches.
2
distance between matches should be slightly less than their length.On two parallel matches lay eight matches perpendicular, forming a square base and boat.Then, perpendicular to the first layer, apply another layer of the eight matches , stacked next to each other.
3
Now start to spread out matches well, directing matches head to one side, putting a match against each other in a circle.Forming a well, make it "roof" of the six matches , stacked perpendicular to the bottom row, and push the top layer of a coin.
4
the corners of the well head gently push up the four matches, holding a coin with your finger.Then remove the figurines coin and squeeze a cube to make it more compact and smooth.Turn the cube around its perimeter and insert some vertical matches .
5
Push the bottom five matches , to the top of the house, they were out in the form of stairs.Place between the dense row of three matches .In the bottom row lay two matches head in different directions, in the middle row - four matches in the third row - six matches .
6
Pinch third row between the third and fourth lifted the top match.Insert the seven matches so that they were at the same level parallel to the fourth match.Between these matches paste inclined matches.Squeeze the design to make it resemble a sloping roof of the house.
7
the bottom row pull out of seven matches and insert the same number of matches to strengthen the structure, so that the head looking straight at you.Top slide into the design of nine matches , pressing the previous series.
8
lateral part boat and you can strengthen further matches, inserted into the bottom of the fourth row.Set another row inclined matches and again squeeze the figure.
9
Remove the two matches of the bow, but not completely, to form a rim on the bow of the ship.Lay back two rows of four and two matches .Now all you have to do from nine matches , inserted vertically into the roof, pipe, and decorate boat match head cut off.
Sources:
  • how to make matches well
Sources:
  • both the matches to make the ship

0
0