you need
  • - linoleum
  • - cutters (scribing)
  • - ink / pen
  • - two rollers (one for paint, a second lapping)
  • - oil paint (black)
  • -glass sheet
  • - solid sheet of tissue paper
  • - solvent-art paintings
Prepare a piece of smooth and even linoleum and special cutters - graver.Lean your thumb on the workpiece, and the remaining fingers hold the cutter and make slits in the surface of the linoleum.
to your engraving was precise and accurate pre-apply to the linoleum circuits that need to be cut, ink or felt-tip pen.Using blades of different thickness, you can achieve interesting and varied textures prints.Once you cut out everything they wanted on the linoleum obtained clichés need to cover with paint.
To do this, take a good hard roll and black oil paint.Apply the paint to the glass sheet and gently roll it on the glass platen.Covering paint roller, slide it on the harvesting of linoleum, adding paint to the roller as needed until all the clichés would not coated with paint.
Take a sheet of solid tissue paper and gently place it on the plate, without moving and without turning the sheet.Holding the workpiece by hand, gently lapped by the linoleum sheet of paper, using a dry solid roller or a spoon.
entire sheet to iron spoon, remove it.You got the first impression - its first engraving .You may want to re-cover the plate and make the second paint the same engraving on the second sheet of paper.
To clear the cliche of paint, soak the cloth in a solvent for the art-paintings, and wipe the workpiece.