One way to clean diesel fuel is filtered.It protects against dust particulates that penetrate the fuel tank when it is opened.The presence of dust particles may cause malfunctions diesel because they clog the channels and openings of the injector nozzle, whereby the combustion chamber is supplied an insufficient amount of fuel and the engine output is reduced.After purification by filtration combustion efficiency is increased, and therefore, the engine power will be higher, fuel is consumed economically.
filter consists of housing and filter element.The filter element is made of special paper, cellulose or synthetic fibers.Some filters are capable of holding both solid particles and of the water
contained in the fuel.During operation, make sure that the filter does not overflow with water, otherwise the water will block it entirely, and to bypass the filter will flow crude oil .It is important to choose the right filter depending on the particle size, or the filter does not fulfill its function.
One variety of filtration - separation.This cleaning method is applicable to highly contaminated diesel fuel.Separators can remove foreign matter from the fuel, even if their concentration is very high.When applying the method of separation of water and separation of solid particles in the centrifuge, and their subsequent assembly onto the bottom of the cleaner housing, and filtering through a special paper with special impregnation.Such equipment is expensive and is usually used in large enterprises with a fuel consumption of more than 150 tons per month.
for self-cleaning diesel fuel you can use special additives that prevent coking of nozzles, the formation of soot on pistons and combustion chamber walls, on the spark plugs.The active formula of diesel additives, depending on their destination, allows to displace the water caught in fuel , and prevents the increase of cetane number and thickening fuel.
Tip 2: How to clean the diesel
almost any diesel fuel has a lot of pollutants, but the water gives the greatest number of problems.Filters-separators are designed to separate the fuel from other liquids do not always work properly, so you have to use other methods of purification.
life of the vehicle depends on the quality of fuel and on its purity.Key pollutants fuel system - organic substances, inorganic elements and water.In a particularly low-quality fuel, asphaltenes are present, which leaves black deposits on the filter and quickly disabling it.Water also causes corrosion in the fuel system supplying fuel to the vehicle and rust.In winter the water freezes in the most remote point in the system and because the engine can not start.In the water can breed bacteria that feed fuel.Because of this, during the warmer days to quickly clog the fuel filter.
well suited for cleaning sedimentation method.Place the diesel fuel in the tank or the canister, and for 25 days the number of mechanical parts is reduced.
to filter large volumes of fuel used centrifugal cleaners, which are quite large installation that clean up to 3 tons of fuel per hour.The centrifuge removes the diesel engine not only mechanical elements, but also water.
for filtration of diesel fuel in the car used separators, which are installed in the fuel system and clean fuel, regardless of the amount of harmful elements.There are mechanical and chemical separators, which are different principle of operation.Separators separate the water and lay it on the bottom cleaner.The more expensive models set special paper layer Aquacon, which retains water in very large quantities.
Separators are placed not only in automobiles, but also in enterprises where the volume of fuel reaches the large amounts (more than 150 tons per month).Frequently clean fuel during the pumping of the tanker into storage tanks for fuel.
If care for the cage, it will last much longer than conventional filters.Suffice it to periodically wash it and clean the bottom, to which filter out all harmful substances.