Tip 1: How to melt the wax

Paraffin is a pale yellow or almost white substance on the properties very similar to wax.Because of its low melting temperature, sufficiently high heat capacity and affinity properties to the wax, paraffin is used in cosmetics, medicine and for household heatings, treatments and paraffin.At room temperature, the wax is in the solid state prior to use so it must be melted.
you need
  • - two pots of different diameters;
  • - gas or electric stove;
  • - paraffin;
  • - water.
Guide
1
Prepare dishes.Take a sufficiently broad and bulk metal pan.Select metal pot at the depth and volume - so that it can be installed inside the first.When installing the handle at pan must lie on the rim of the larger bottom should not touch.
2
Set a small pan on a large.Fill the space between them with water by approximately one third - so that the small pot sufficiently immersed into the water bottom.Take a small saucepan.
3
Start heating the water in a large saucepan.Light the gas burner or electric hot
plate switch.Put it on a pan with water and cover.Burner capacity can be maximized.
4
Prepare paraffin.Crush or chop it into small pieces.Preparation of paraffin to produce a newspaper or oilcloth to easily collect and use small crumbs.
5
Place the wax into the container.Compact, place the pieces in a small pot of wax.Fill it no more than half.
6
Begin melting the wax.When the water comes to a boil in a large pot, remove from her cover and set it with a small pieces of wax.Reduce the power of the burners so that the boiling of the water went, but it was intense.Cover a small saucepan.
7
Melt paraffin.Wait until the transfer of the entire mass of wax in the liquid state.Melted wax takes less volume than its pieces, originally placed in the pan.Therefore, if the liquid paraffin need, can be placed in the dish several solid pieces and await their complete melting.
8
Complete melting process.Turn off the burner plate.Carefully remove pan melt the wax from boiling water.

Tip 2: How to melt paraffin

Paraffin is widely used in everyday life, medicine and cosmetology.Such properties of wax such as low melting point and high thermal capacity, allow them to different treatments heatings and care for the skin.Normal paraffin are usually located in solid phase before being used to melt the material is required.
How to melt the wax
you need
  • - paraffin;
  • - water;
  • - two metal containers;
  • - electric (gas) stove.
Guide
1
Prepare two metal container of appropriate size.These may be metal pans or bowls of different volume.Size capacity is chosen so that one of them is free to enter other.The edges of the lower capacity or handle small pan must lie on the circumference of a larger capacity, should not touch the bottom.
2
Pour into a large container about one-third of water.Set the pan on top of smaller volume.Adjust the water level so that the bottom of the top container has been slightly submerged.Now, you can temporarily remove the top bowl.
3
Put a bowl of water on a hot electric or gas oven and cover it with a lid.Set the maximum power of the burner, to bring the water to a boil.
4
on a piece of paper or old newspaper grind pieces of wax - so they melt faster.Put them in a smaller capacity, the substance takes no more than half of it.
5
Uncover kastrbli, which has already begun to boil water.Put it in a container with paraffin.Adjust the power of the burner or burners to somewhat reduce the intensity of boiling water. Paraffin close the lid.
6
Wait until the wax has melted and turned into a liquid mass.If necessary, add another portion of the wax, making it the number to the required level.After the final melting substance disconnect and remove the plate with both her capacity.
7
Use cooked wax as directed.When handling molten paraffin be careful not to get burned.
Cosmetic paraffin Face: preparing a mask at home
Related article
Cosmetic paraffin Face: preparing a mask at home
Note
molten on a steam bath with paraffin can be greatlyburn, be careful.

Do not try to melt the wax over an open fire.The melt temperature will be much higher than the melting wax on a steam bath.Contact this wax on the skin will lead to very severe burns.Additionally, at temperatures above 140 degrees wax begins to oxidize.

0
0