Take the asbestos cement pipes and drill in the bottom of the hole diameter of 10 mm.They have to cover the entire area of the pipe at the bottom - about a meter and a half - and staggered.Then, also at the bottom of the tube
, approximately 25 cm apart PROPYLENE circular groove.They should not be through.These grooves required for attachment to mesh well with the help of a copper wire, because wire must not be issued, and interfere with the movement of the tube.Grind the lower part of the pipe so as to have something like a funnel.Then, the pipe would be better to go down the ground.Now you can wrap the end of the pipe net for holes and fix the wire mesh.
on the bottom of the tube wear scrap another pipe metal.Its length should be about 25cm and a diameter slightly larger inside diameter to be asbestos cement pipes outside.With the welding machine in the middle of a piece of pipe weld wire - rod.Its diameter shall be 5 mm.This emphasis, which will not allow cutting of asbestos-cement pipes with a jump or slide on it.When the scrap will be placed over the pipe grid for wells lock into place firmly.
Dig a deep hole, immerse the tube.Then paste it into the upper hole Bailer.Then slowly and carefully choose from the well bottom.When the soil is cleaned, the pipe will sink down.To facilitate the effort, use the arm, but do not hit the pipe so that it is not cracked.When one tube to immerse themselves in the ground, it nastavte other asbestos-cement pipes.This should be done the same way - with trim and an internal focus.Instruct the pipe should be as long as there is not much water.Then he should be thrown into the well nylon bag of cement.He sealed the bottom of the water to flow into the well only through holes drilled in the pipe.
Tip 2: How to do well at home
Well in my house - it is very convenient.You do not depend on public utilities and always have clean water.To make well , you can go to companies that perform the procedure.Also, you can do everything yourself.This is difficult to nothing.
- 2 pumps, 2 barrels, hoses, pipes, pipe couplings and a few 6-meter bars.
Once you have prepared everything you need, take a shovel and dig a hole.It should be an area of approximately 1 square meter.The depth should be about 60 centimeters.The length of the pipe must be 2 meters.On both ends of the pipe threaded.Further, when we introduce the pipe into the ground, using the sleeve it will need to fasten a second tube, then a third and so on, until you reach the desired depth.
At first tube should be on one side teeth.Make them with a grinder.The second side of the pipe to be threaded.You must first cheat on her with the end portion of the adapter for your hose.Pipes is best done once a length of about 5 meters.You will avoid problems with the twisting of the adapter.Also, the design will have more weight that will allow the pipe more quickly to crash into the ground.
First you need to make lumber tripod and put it over the excavated pit.It is necessary to attach a tripod on top of video, which will be passed through the rope.Be sure to attach the tripod.To do this, connect the bottom and in the middle of the three legs together in the same beam.After a short distance from Trinoga need to hammer into the ground a wooden or metal pin.It is best to take care of the creation of the drum.It is necessary to raise the water from the well.To him and attach one end of the rope.The other end of the need to bind to the tunnel.The tube, which is connected to the nozzle is inserted into the hole.
engaged barrels.Around the pits need to put a barrel on the ground, and the other, which is made from scrap materials, to the height of the upper level of the first barrel.Below the top of the barrel is necessary to drill a hole and insert a tube with a tap to.At the top of the barrel is necessary to make a filter.To do this, suitable conventional dry grass.Fills its barrel.
in the lower barrel will be a pump that draws water and feeds it into the pipe.Water exits the bottom of the pipe, while the washed soil.All of this falls into the pit.For the pumping of turbid water is the second pump.He performs pumping to the upper barrel.The barrel will also get part of the soil.After a while, you need to remove the soil with a shovel.The pipe will be deepened, and the ground will go up.
- How to make the most well
- how to make the most well