you need
  • - gauge
Guide
1
Warm up the engine to operating temperature (over 60 degrees).
2
Turn off the engine and remove the pressure sensor, which is usually located in the cylinder head.
3
Attach the appropriate size gauge sensor system instead.To connect using adapters with different diameters.
4
Start the engine and remove the pressure gauge at different speeds of the engine.
5
Again, stop the engine.Disconnect the pressure gauge when the pressure oil in the system drops to zero.
6
Install the pressure sensor in place.
7
compare readings taken with the values ​​declared by the manufacturer of the engine
, and make the appropriate conclusions.