- - vacuum device for holding the glass - 2 pieces;
- - Adhesive for windshields - 1 tube;
- - glue gun;
- - Heat gun.
paste procedure in the body opening windscreen is possible only together, alone also cope with such a task would be extremely difficult.This is a prerequisite for the existence of both participants experience the anticipated repairs.
work is carried out in a dry and clean environment, and all sorts of cluttering it inadmissible.Early elektrofenom for half an outer circumference of the glass heats up, close to the opening.T
hen, with vacuum devices, with special strings from the body must remove the old accessory (or its remnants).
In the frame of the opening of the body need to keep the old layer of adhesive thickness up to two millimeters.Then release the new glass installation location carefully cleaned from dust, moisture and other contaminants, and it is applied to the primer layer.
have prepared a new windshield with a carefully cleaned surface with a brush coated with an activator of ceramic bezel, which after 2-3 minutes to apply the primer.
opening the cartridge and insert it into a gun with a tip, it is necessary to squeeze out the adhesive evenly on the prepared surface of the rim or on the perimeter of the opening of the body.
Next promptly prepared glass is installed on the regular place and with a demountable vacuum devices.Keep in mind that the countdown time required for crystallization glue starts with the opening of the cartridge, rather than after application.
Tip 2: How to paste the glass in the car
If you need to replace the windshield of the car, you can consult a workshop where they will all work quickly and qualitatively.But if you have the desire to learn how to repair the car, as well as an essential tool - try to paste the glass yourself.
- - blankets or cloth;
- - polyethylene film;
- - foam cushions;
- - knife or string for cutting glass;
- - ground;
- - a vacuum cleaner;
- - a chisel;
- - adhesive;
- - spatula;
- - new windshield.
First prepare the car to replace the glass, close the passenger seat and the driver's protective covers or unnecessary tissue.The handle of the box and the steering wheel in plastic wrap and secure with tape.Be sure to close the ventilation shaft as she got in shards of glass can then fly from there with the air flow.
between the ceiling and roof of the car put some foam rollers to prevent damage to the ceiling when cutting glass.If possible, move the instrument panel or screened its metal strip from the cutting edge of the knife.
Try to keep the maximum cut evenly and smoothly on the old glue line.To level the small irregularities, special chisel.If in some places there is no paint, primer treat them.Vacuuming remove the window frame remains of dirt and dust.
Spend fitting the new windshield to the opening.Secure the thin strips of foamed polyurethane foam, glass to set the desired position.
Prepare for gluing glass, ridding it of silicone, oil and other contaminants.To improve the adhesion of the glass, using special activators and primers, additionally they will protect the seam from the destructive ultraviolet radiation.
Apply glue one indissoluble layer with a plastic nozzle with a V-neck.If such an attachment you do not, apply it with a spatula to ensure uniform thickness.
Install the windshield into the window opening, and push to the glue could grab.Immediately remove excess adhesive.If possible, check the tightness of fit of the glass using an ultrasonic detector.
After gluing the windscreen during the first days do not wash the car wash at high pressure, do not drive the borders, do not place on top of the dashboard bulky and heavy items.
- like paste windshield